ATech Machine ZETA-02 A Bedienungsanleitung PDF herunterladen (Seite 15)

Operating and Safety Instructions

Always disconnect the electric and power supply first before carrying out these

works.

If the machine is not active because of maintenance or service, put a warning

message that can be easily seen, indicating the situation

8.2. AIR PRESSURE ADJUSTMENT

8.2.1. Pull the adjustment button of the conditioner upwards

8.2.2. Turning the adjustment button in clockwise direction increases the

pressure.

8.2.3. Turning the adjustment button in counter clockwise direction decreases

the pressure.

8.2.4. Once you read 6-8 Bar on the manometer, push the adjustment button of

the conditioner down and lock it in that position.

8.2.5. To make up the lessen oil level in the oil tank, take out the oil depot by

turning. And re-fasten the oil depot after make up.

8.2.6. The manufacturer recommends to use the following oils with the

conditioner: TELLLUS C 10 / BP ENERGOL HLP 10/ MOBIL DTE LIGHT / PETROL

OFISI SPINDURA 10.

8.2.7. To discharge the accumulated water in the lubricator, loosen the water

discharge nut.

8.2.8 Adjust the lubricator working level to once for 10 cycles.

1 2 ... 10 11 12 13 14 15 16 17

Keine Kommentare

ATech Machine ZETA-02 A Bedienungsanleitung Seite 15